Bolt Cutters

High quality electrically non-conductive bolt cutters.

• Black oxide coated high strength alloy cutting jaws are adjustable for a complete precision cut
• Fiberglass handles are optimized for stiffness and reduced weight
• Black vinyl grips offer user comfort and control.
• Lightweight, strong fiberglass handles are electrically non-conductive for applications where electrical power may be present

Quality 15″ long mini bolt cutter for lighter duty service.

• Adjustable head can be adjusted for complete clean cuts
• Black handles with cushion grips

Fast, precise cutting! A superior breaching bolt cutter that can cut through virtually anything with-in it's jaws.

• Extra comfort and control with our stress relieving grips
• Forged jaws are optimized for toughness and long cutting life
• Handles are powder coated in tactical black. Tough and ultra-light weight
• Forged steel heads are precision machined and fully adjustable

Padlocks and bolts cut with ease when you extend this cutter from 19″ to 30″.

• Handles fold open quickly and lock into place automatically
• Adjustable cutting head for perfect alignment
• Cutting capacity: 3/8″
• Tactical black

The Hydraulic Bolt Cutter is a high-quality, compact bolt cutter that is powered by our self-contained hydraulic foot pump.

• Innovative bolt cutter
• Quickly and quietly cuts through padlocks and chains
• Cutters are small enough to work in tight locations yet offers same cutting capacity as our full length cutters
• Quick disconnect fittings allow user to switch hose from entry tool to cutter head quickly
• Can be ordered separately or as part of entry pack

• Features drop-forged high-grade alloy tool steel with precisely heat-treated, precision cutting edges for longer cutting life.
• Suitable for general purpose and designed for cutting medium steel and soft bolts, nuts, chain, etc.
• Recommendable maximum hardness of material to be cut: Brinell 370-Rockwell C40-133-mm2.

• Features drop-forged high tensile alloy tool steel with specially heat-treated, precision cutting edges for longer life.
• Suitable for cutting harder materials.
• Recommendable maximum hardness of material to be cut: Brinell 450-Rockwell C48-162 kg-mm2.

• Designed for cutting fast clean, precision and eliminating grinding or filing.
• Features drop-forged high grade alloy tool steel head with specially heat-treated cutting dies.
• Efficiently cuts 6mm, 8mm, 10mm, 12mm or 1-4", 5-16", 3-8" and 1-2" soft steel threaded rod with interchangeable dies.
• Can be used primarily on construction site where threaded rods are used to secure pipe, conduit sprinkler systems, duct work, lighting, ceiling and many other construction components.
• Can be bolted on workbench for easy operation.

• Standard black jaws with forgedaluminum handles.

• Designed for cutting fast clean, precision and eliminating grinding or filing.
• Features drop-forged high grade alloy tool steel head with specially heat-treated cutting dies.
• Efficiently cuts 6mm, 8mm, 10mm, 1-4, 5-16, 3-8 and 1-2 soft steel threaded rod with interchangeable dies.
• Can be used primarily on construction site where threaded rods are used to secure pipe, conduit sprinkler systems, duct work, lighting, ceiling and many other construction components.
• Can be bolted to floor or board for easy operation.

• Angular jaws with clipper-cut knives which have 30 centigrade offset to keep work in view and hands clear of work surface while cutting.
• Recommendable maximum hardness of material to be cut... Brinell 370-Rockwell C40-133 kg-mm2.

• Light weight, general purposes.
• Special alloy hardened and heat-treated cutting blades.
• Comfortable grip spring action presents one hand operation.

• Light weight, general purposes.
• Special alloy hardened and heat-treated cutting blades.
• Comfortable grip spring action presents one hand operation.

• Light weight, general purposes.
• Special alloy hardened and heat-treated cutting blades.
• Comfortable grip spring action presents one hand operation.

• Light weight, general purposes.
• Special alloy hardened and heat-treated cutting blades.
• Comfortable grip spring action presents one hand operation.

• Recommendable maximum hardness of material to be cut... Brinell 450-Rockwell C48-162 kg-mm2.

• Features drop-forged high tensile alloy tool steel with highly heat-treated, precision cutting short edges with extra treatment on the cutting edges.
• Suitable for heavy duty use.
• Recommendable maximum hardness of material to be cut... Brinell 450-Rockwell C48-162 kg-mm2.

• Shear-cut knives specially designed for cutting soft and hard cable, wire rope, ACSR cable.

• Suitable for heavy duty use and designed for cutting hard, non-alloy chain.
• Short-nosed and high tempered center-cut jaws.
• Recommendable maximum hardness of material to be cut... Brinell 450-Rockwell C48-162 kg-mm2.

• Shear-cut knives give clean and sharp cut.
• Suitable for cutting wire rope, piano wire, steel wire, ACSR cable and aircraft cable.
• Suitable for cutting wire rope, piano wire, steel wire, ACSR cable and aircraft cable.

• Notched and shear-cut knives hold and lock cable in cutting position.
• Shear-cut knives give clear and sharp cut.
• Suitable for cutting wire rope, piano wire,steel wire, ACSR cable and aircraft cable.
• Not for cutting stainless steel wire.

• The blade can enter into narrow space, because the cutting edge of the blade has sharp angle. The sharp cutting edges of the blades enable to cut the 7.0mm dia. soft steel bars (up to 80HRB) with very low cutting load. MN350G shows 40% lower cutting value than Angular Cutter.
• Special blade shape makes flatter cutting enable. The dislance from the back side of the blade and the edge is very low as 0.2mm.

• Light weight, general purposes.
• Special alloy hardened and heat-treated cutting blades.
• Comfortable grip spring action presents one hand operation.

• Drop-forged special alloy tool steel jaws with heat-treatment.
• shear-cut knives give clean, smooth and easy cut, excellent for pallets, loading and unloading cars, trucks, ship and metal recycling yards.

• This new product includes hammer function(Sliding striker). The work efficiency of workers who utilize this finction will improve.

• Designed for cutting and bending concrete re-inforced steel rods (Re-Bar).
• Features drop-forged high grade alloy tool steel blades with special heat-treatment.
• Shear-cut blades cut and bend re-bars to 90 centigrade or 180 centigrade with versatile operation.
• Can be bolted to floor or board for easy operation.
• Handle of RC19 can be extended out from 1.3m to 2m (52" to 80") for a better leverage.

• By bending Grip and setting it on the ground, cutting materials stably and safely.
• It is also possible to cut materials without bending Grip same as the standard bolt cutter.

• Most popular and widely used with all purpose cuts adaptable from soft to medium hard materials. These bolt cutters give quick and easy cut of rods and bolts. Blades are drop forged from alloy tool steel and carefully heat-treated for maximum strength and wear resistance. All tubular handles except 300mm with ductile handles.
• 300mm-450mm clipper cut and 600mm-1050mm center cut.
• 350mm & 450mm center cut available at buyer’s request.

*Wear safety glasses at all times. Warn your fellow workers of flying metal to protect those in the area. Do not twist or pry with tool while cutting

• Highest grade special high carbon alloy steel with special heat treatment to maximize its tensile strength for daily use on hardest material cutting such as hard chains,locks, and padlock.
• The cutting edge shape is uniquely designed for hard materials cutting to withstand toughest work.
• Silver color lockplate for identification.
• Lighter weight, great strength on steel tubular handles on 18″ to 36″ bolt cutters.
• Made in Japan

• Drop forged from selected alloy tool steel and carefully heat-treated for durability. Ratchet action and special shape of cutting edges assure much easier cut of soft steel bar or reinforcing rod than conventional bolt cutters. Coarse rods or bars can be cut by the bottom part of edge and finer ones by the top of edge.

• 30% lighter weight than steel handle type, which makes it easier to carry and work on through extended cutting time.
• Improve safety level for overhead cutting or high work place by minimizing your tool weigh.
• Clipper Cut design on 12″ allows you flush cuts that are close to workpiece.
• Center Cut design on 14″ & 18″ prolong the life span of the blade.
• The Jaw Blade is identical to the “Standard Model”.
• Introducing the most compact size 250mm keeping the cutting capacity same as 300mm. Great performance for professionals.
• Made in Japan

• Made from carbon tool steel and carefully heat treated. Cutting edges are offset 30゜from handles to cut materials on surface. Blades interchangeable with bolt cutters.